Have you ever struggled to reach your ignition key on your 2019+ CRF 110 after adding aftermarket bars or a light bar? The carbon fiber crf 110 key relocation bracket offers a sleek, durable solution that moves your key switch and gas light to a more convenient and visible location. This upgrade not only enhances rider ergonomics but also ensures you can easily monitor your fuel levels while on the trail. In this guide, we’ll walk you through everything you need to know to successfully install this key and gas light relocation bracket on your bike.
CRF 110 Key Relocation Bracket
What Is the Key Relocation Bracket?
The carbon fiber crf 110 key relocation bracket is a precision-engineered accessory designed specifically for 2019 and newer Honda CRF 110 dirt bikes. It relocates the ignition key and gas light from their factory positions to a more practical location, improving rider comfort and visibility without compromising the bike's aesthetics or functionality.
Benefits of PC Carbon Fiber Material
Carbon fiber stands out as an ideal material for this application because it is lightweight yet incredibly strong. The bracket offers resistance to heat, UV rays, and moisture, ensuring it remains durable even in harsh off-road conditions. Compared to plastic or metal options, carbon fiber provides a premium finish and superior longevity, adding value to your CRF 110 build.
Preparing for Installation
Tools and Materials Needed
- PC Carbon fiber crf 110 key relocation bracket kit
- Socket wrench set
- Electrical tape or zip ties for securing cables
- Anti-seize lubricant (optional)
Key Safety Precautions
Before you begin, make sure to unplug the battery to avoid any electrical shorts or accidental triggering while relocating the key and gas light components. Working in a clean, well-lit area will also help you avoid losing any small mounting hardware during the process.
Step-by-Step Installation Process
Removing the Factory Key and Gas Light Assembly
Start by carefully removing the stock key switch and gas light from their factory mounts on the triple clamp or handlebar area. You’ll need to loosen bolts and gently disconnect wiring harnesses. Keep track of all hardware as some may be reused during the installation.
Mounting the PC Carbon Fiber Bracket
Position the carbon fiber crf 110 key relocation bracket where the design fits best, typically near the handlebars or front triple clamp area. Align the mounting holes and use the included hardware to secure it firmly. Tighten all bolts to the manufacturer-recommended torque settings to prevent loosening during rides.
Connecting and Routing Wiring
Reattaching the Ignition Key and Gas Light Wiring
Once the bracket is mounted, reconnect the ignition key wiring and the gas light connectors to their new positions on the relocated bracket. Ensure all connections are secure and free of corrosion or damage to maintain reliable electrical performance.
Securing Wiring for Durability
Use zip ties or electrical tape to bundle and secure wires along the frame, preventing them from interfering with moving parts. Proper wire routing minimizes wear and keeps your handlebar area organized, reducing the risk of electrical issues while riding.
Troubleshooting Common Installation Issues
Key Does Not Turn or Insert Properly
If you experience difficulty inserting or turning the key after installation, first double-check the bracket alignment. Slight repositioning might be necessary to ease key operation. Inspect the key cylinder for any obstructions or debris.
Gas Light Not Functioning Correctly
If the gas light does not illuminate or stays on incorrectly, verify that the wiring connections are secure and properly routed. Inspect the connector pins for damage, and ensure the bulb or LED is intact. Refer to your bike’s electrical manual if needed.
Maintenance Tips for Long-Term Performance
Regular Inspection of Mounting Hardware
Periodically check that all bolts and screws holding the bracket remain tight. Vibrations from off-road riding can loosen fasteners over time, so routine inspections prevent accidents or component loss.
Cleaning and Care for Polycarbonate Carbon Fiber
Clean the bracket using soap and water. Keeping the surface free of dirt and grime preserves both the look and strength of the pc carbon fiber material.
Why Choose a Key and Gas Light Relocation Bracket?
Improved Accessibility and Safety
Relocating your ignition key and gas light means you can focus more on riding and less on fumbling for controls. This is particularly beneficial with taller or aftermarket handlebars that can obstruct the factory key location.
Compatibility with Aftermarket Accessories
Many riders add LED light bars or bar bags that make stock key placement inconvenient. A key and gas light relocation bracket works around these additions, maintaining ease of use and enhancing the overall cockpit layout of your CRF 110.
In summary, the carbon fiber crf 110 key relocation bracket is a smart upgrade for riders who want better access and visibility of their ignition key and fuel indicator on 2019+ CRF 110 models. Its lightweight, durable construction combined with an easy-to-follow installation process makes it a worthwhile enhancement to your dirt bike setup. If you’re ready to improve your riding experience and safeguard convenience on the trail, explore our product page to learn more about this carbon fiber bracket and order yours today.